topshadow
go | Advanced Search
build a bracket
request a quote
Allow us to draw your part.
Design, Fabricate, and Machine Metal Parts Immediately.
Home
Typical Material Analysis for Fabrications

 
Stainless steel is defined as a ferrous alloy with a minimum of 10.5% chromium content. The name originates from the fact that stainless steel does not stain, corrode or rust as easily as ordinary steel. This material is also called corrosion resistant.

 
Stainless steels have higher resistance to oxidation (rust) and corrosion in many natural and man made environments.

 
Stainless steel's resistance to corrosion and staining, low maintenance, relative inexpensive and familiar luster make it an ideal base material for a host of commercial applications.

 
Stainless steels will be more expensive that standard steel.

 
Aluminum is found primarily in bauxite ore and is remarkable for its resistance to corrosion (due to the phenomenon of passivation) and its light weight. The metal is used in many industries to manufacture a large variety of products

 
Aluminum is a soft, lightweight metal with normally a dull silvery appearance caused by a thin layer of oxidation that forms quickly when the metal is exposed to air.  Aluminum is nontoxic (as the metal), nonmagnetic, and nonsparking. Aluminum is about one-third as dense as steel or copper; it is malleable, ductile, and easily machined and cast. It has excellent corrosion resistance and durability because of the protective oxide layer.

 
Improper use of aluminum may result in problems, particularly in contrast to iron or steel, which appear "better behaved" to the intuitive designer, mechanic, or technician. The reduction by two thirds of the weight of an aluminum part compared to a similarly sized iron or steel part seems enormously attractive, but it must be noted that this replacement is accompanied by a reduction by two thirds in the stiffness of the part. Therefore, although direct replacement of an iron or steel part with a duplicate made from aluminum may still give acceptable strength to withstand peak loads, the increased flexibility will cause three times more deflection in the part.

 
Aluminum will be more expensive than standard steels and approximately the same cost as stainless steel.

 
Carbon Steel is an alloy primarily composed of iron, with carbon content between .02% and 1.7%. depending on grade.  Carbon is the most cost effective alloying element for iron.  Commercial grades of steel used in the production of brackets and fabrications are typically supplied in sheets with thicknesses described as gauges.  Typical gauges would be 12 (.10”), 14 (.075”), 16 (.060”), 20 (.035”)gauge.  Plate steel would be described in thickness of 3/16 (7 ga), ¼” ,3/8” and ½”. 

 
Light gauge sheet steel (12 gauge to 20 gauge) would normally be cold rolled and have a smooth, clean surface.  Heavy gauge steels (3/16” to ½”) are typically hot rolled.  The surface is rougher than cold rolled but still acceptable for most applications.

 
Steel is the most cost effective and durable material available for fabrications.  It is not resistant to rust so therefore needs surface coverage. (See Typical Material Coatings for Resistance to Rust)
 
DD
Short Run Pro is proud to say that all our custom metal products including our brackets, steel angle, braces, supports, covers, housings, machined parts and other metal parts are made right here in the United States of America. When you order from SRP you can know that your parts are being made to USA quality standards and your satisfaction in mind.

Short Run Pro is a comprehensive custom metal manufacturing resource. We provide custom metal fabrication and machining services. In addition to metal fabrication services SRP provides machining, stamping, welding, paint and plate finishing services. We have the capabilities for all your custom metal fabrication requirements.

SRP provides metal fabrication services for orders of one to thousands of custom parts. We can supply stamped or laser cut metal fabrication parts. We produce quality, accurate parts to your custom specifications. We produce custom metal fabrication parts out of almost any metal. We archive your custom metal fabrication drawings on file in our database so you can access the drawing for future metal fabrication runs. All our custom metal fabrication products are made right here in the United States of America.